Up W7BRI 1150 Radio + Packet Pack Prev Next Slideshow

 Previous image  Next image  Index page
Full inside view
Lid close up
KPC3, etc. close up
Modified PS-4 #1
Modified PS-4 #2
  Modified KPC3 to Kenwood adapter.jpg - This     right-angle metal D-sub hood kit     was a great find because it works in very tight spaces.  This pic shows the adapter that connects the KPC's DB9 radio jack to the Kenwood D710A's DIN6 port.  I drilled a hole in the adapter and installed a rubber grommet so I could route the cable 180 degrees to the other side of the case. The other right-angle adapter connects to the KPC3's serial port via a    Slimline DB25M to DB9F adapter   .  This pushes out the RA serial adapter past the RA radio adapter, letting me run the cable along the bottom of the case and up to the    Serial 3X   .  
Console and PowerPole jacks
Modified PowerPole #1
Modified PowerPole #2
Modified PowerPole #3
Antenna jack

Modified KPC3 to Kenwood adapter
Camera: FUJIFILM FinePix F10 | Date: 10/23/09 6:26 AM | Resolution: 2848 x 2136
Total images: 15 | Last update: 11/21/09 3:58 PM | Help